Klik Rivet-Nuts
Available in Steel-Zinc Plated or Aluminum Class 2B Threads
Klik Rivet-Nuts™ can be use in wide range of applications and are designed to provide a very efficient and cost-effective method of placing permanent threads in thin materials. Installed from one side, Klik Rivet-Nuts are perfect for use in metal, fiberglass and rigid plastic previously too thin for tapped threads. Klik Rivet-Nuts provide a neat appearance and once in place, the internal threads are ready for a screw or bolt.
Lightweight tooling assures easy installation by the operator and reduces costs when compared with other methods. After installation, Klik Rivet-Nuts provide permanent, captive threads that resist high loads, do not allow loosening under vibration and will not rotate when attached to the mating material.
Klik Rivet-Nuts with large diameter heads can be used in soft materials which inherently offer little, if any thread strength.
The flathead design provides the most bearing surface for higher torque applications. The larger flange extends above the material in which it is installed and provide a built-in spacer.
Cross Section View
Klik Rivet Nut (Flat Head) Specification
| Thread Size | Steel Marson Bulk Part No. | Alum. Marson Bulk Part No. | Body Dia. Max. +-.005 | Head Dia. Ref. +-.005 | Head Height +-.005 | Body Length +-.005 | Grip Range | Hole Size | Drill Size | ||
| Min | Max. | Min. | Max. | ||||||||
| 6-32 | 57110 | 57210 | .189 | .325 | .032 | .438 | .010 | .075 | .189 | .193 | # 12 |
 |
|||||||||||
| 8-32 | 57120 | 57220 | .221 | .357 | .032 | .438 | .010 | .075 | .221 | .226 | # 2 |
| 8-32 | 57121 | 57221 | .221 | .357 | .032 | .500 | .075 | .120 | .221 | .226 | # 2 |
|
|||||||||||
| 10-24 | 57130 | 57230 | .250 | .406 | .038 | .531 | .010 | .080 | .250 | .254 | 1/4" |
| 10-24 | 57132 | 57232 | .250 | .406 | .038 | .594 | .080 | .130 | .250 | .254 | 1/4" |
|
|||||||||||
| 10-32 | 57140 | 57240 | .250 | .406 | .038 | .531 | .010 | .080 | .250 | .254 | 1/4" |
| 10-32 | 57142 | 57242 | .250 | .406 | .038 | .594 | .080 | .130 | .250 | .254 | 1/4" |
|
|||||||||||
| 1/4-20 | 57150 | 57250 | .332 | .475 | .058 | .625 | .010 | .080 | .332 | .338 | Q |
| 1/4-20 | 57152 | 57252 | .332 | .475 | .058 | .687 | .080 | .140 | .332 | .338 | Q |
| 1/4-20 | 57154 | 57254 | .332 | .475 | .058 | .750 | .140 | .200 | .332 | ..338 | Q |
|
|||||||||||
| 5/16-18 | 57171 | 57271 | .413 | .665 | .062 | .750 | .030 | .125 | .413 | .423 | Z |
| 5/16-18 | 57174 | 57274 | .413 | .665 | .062 | .875 | .125 | .200 | .413 | .423 | Z |
|
|||||||||||
| 3/8-16 | 57181 | 57281 | .490 | .781 | .088 | .844 | .030 | .115 | .490 | .500 | 12.5mm |
| 3/8-16 | 57184 | 57284 | .490 | .781 | .088 | .938 | .115 | .200 | .490 | .500 | 12.5mm |
Three easy steps for instalation:
