Klik Rivet-Nuts/Ribbed

Klik Rivet-Nuts/Ribbed

Increased Torque Strength over Conventional Style
360° Knurled Expansion After Setting
Vibration Resistance
Large Flanged Head Increases Push Out Strength
Steel Only with Yellow Zinc Dichromate Finish
Wide Range of Inch and Metric Sizes Available:
6-32 thru ¼-20, 5/16-18 and 3/8-16
M4 thru M10
Standard and Extended Grip Ranges Available in Each Size

Klik Rivet-Nuts/Ribbed Style can be used in a wide range of applications and are designed to provide a very efficient and cost-effective method of placing permanent threads in thin materials. Installed from one side, Klik Rivet-Nuts/Ribbed are perfect for use in metals, fiberglass and rigid plastic previously to thin for tapped threads. Klik Rivets/Ribbed provide a neat appearance and once in place, the internal threads are ready for a screw or bolt. Additional features of the ribbed rivet-nut include: Increased torque strength over conventional style, 360° knurled expansion after setting, vibration resistance and large flanged head which increases push out strength. Available in steel only with yellow zinc dichromate finish and in a wide range of sizes: 6-32 thru 1/4-20, 5/16 and 3/8-16, M4 thru M10;. Standard and extended grip ranges are available in each size.Lightweight tooling assures easy installation by the operator and reduces costs when compared with other methods. After installation, Klik Rivet-Nuts/Ribbed provide permanent, captive threads that do not allow loosening under vibration and will not rotate when attached to the mating material.

Klik-Rivet-Nuts/Ribbed with large diameter heads can be used in soft materials which inherently offer little, if any thread strength.The flathead design provide the most bearing surface for higher torque applications. The larger flange extends above the material in which it is installed and provides a built-in spacer.

Klik Rivet-Nuts /Ribbed Specifications

Thread Sizes Marson
Bulk
Part #
A
Body Length
+-.015
(mm)
B
Head Dia.
+-.015
(mm)
C
Head Height
(NOM)
(mm)
D
Body Dia.
Max
+-.015
(mm)
Grip Range
Min (mm)      Max (mm)
Hole Size
Required
               
6-32 57310 .420 10.7 .392 09.9 .028 0.71 .264 06.7 .020 0.50 .080 2.03 17/64
6-32 57312 .470 11.9 .392 09.9 .028 0.71 .264 06.7 .080 2.03 .130 3.30 17/64
8-32 57320 .420 10.7 .392 09.9 .028 0.71 .264 06.7 .020 0.50 .080 2.03 17/64
8-32 57321 .470 11.9 .392 09.9 .028 0.71 .264 06.7 .080 2.03 .130 3.30 17/64
10-24 57330 .475 12.1 .417 10.6 .028 0.71 .295 07.5 .020 0.50 .130 3.30 19/64
10-24 57332 .585 14.9 .417 10.6 .028 0.71 .295 07.5 .130 3.30 .225 5.71 19/64
10-32 57340 .470 11.9 .417 10.6 .028 0.71 .295 07.5 .020 0.50 .130 3.30 19/64
10-32 57342 .585 14.9 .417 10.6 .028 0.71 .295 07.5 .130 3.30 .225 5.71 19/64
1/4-20 57350 .580 14.7 .500 12.7 .028 0.71 .390 09.9 .027 0.68 .165 4.19 25/64
1/4-20 57352 .685 17.4 .500 12.7 .028 0.71 .390 09.9 .165 4.19 .260 6.60 25/64
5/16-18 57371 .690 17.5 .685 17.4 .032 0.81 .530 13.5 .027 0.68 .150 3.81 17/32
5/16-18 57374 .805 20.4 .685 17.4 .032 0.81 .530 13.5 .150 3.81 .312 7.92 17/32
3/8-16 57381 .690 17.5 .685 17.4 .032 0.81 .530 13.5 .027 0.68 .150 3.81 17/32
3/8-16 57382 .805 20.4 .685 17.4 .032 0.81 .530 13.5 .150 3.81 .312 7.92
M4 57360 .420 10.7 .392 09.9 .028 0.71 .264 06.7 .020 0.50 .080 2.03
M4 57365 .470 11.9 .392 09.9 .028 0.71 .264 06.7 .080 2.03 .130 3.30
M5 57385 .420 10.7 .392 09.9 .028 0.71 .264 06.7 .020 0.50 .130 3.30 17/64
M5 57384 .470 11.9 .392 09.9 .028 0.71 .264 06.7 .130 3.30
M6 57386 .580 14.7 .500 12.7 .028 0.71 .390 09.9 .027 0.68 .165 4.19 25/64
M6 57387 .685 17.4 .500 12.7 .028 0.71 .390 09.9 .165 4.19 .260 6.60 25/64
M8 57388 .690 17.5 .685 17.4 .032 0.81 .530 13.5 .027 0.68 .150 3.81 17/32
M8 57389 .805 20.4 .685 17.4 .032 0.81 .530 13.5 .150 3.81 .312 7.92 17/32
M10 57390 .690 17.5 .685 17.4 .032 0.81 .530 13.5 .027 0.68 .150 3.81 17/32
M10 57391 .805 20.4 .685 17.4 .032 0.81 .530 13.5 .150 3.81 .312 7.92 17/32