Klik Rivet-Nuts

Available in Steel-Zinc Plated or Aluminum Class 2B Threads

Klik Rivet-Nuts™ can be use in wide range of applications and are designed to provide a very efficient and cost-effective method of placing permanent threads in thin materials. Installed from one side, Klik Rivet-Nuts are perfect for use in metal, fiberglass and rigid plastic previously too thin for tapped threads. Klik Rivet-Nuts provide a neat appearance and once in place, the internal threads are ready for a screw or bolt.

Lightweight tooling assures easy installation by the operator and reduces costs when compared with other methods. After installation, Klik Rivet-Nuts provide permanent, captive threads that resist high loads, do not allow loosening under vibration and will not rotate when attached to the mating material.

Klik Rivet-Nuts with large diameter heads can be used in soft materials which inherently offer little, if any thread strength.

The flathead design provides the most bearing surface for higher torque applications. The larger flange extends above the material in which it is installed and provide a built-in spacer.

Cross Section View

Klik Rivet Nut (Flat Head) Specification

Thread Size Steel Marson Bulk Part No. Alum. Marson Bulk Part No. Body Dia. Max. +-.005 Head Dia. Ref. +-.005 Head Height +-.005 Body Length +-.005 Grip Range Hole Size Drill Size
Min Max. Min. Max.
6-32 57110 57210 .189 .325 .032 .438 .010 .075 .189 .193 # 12
8-32 57120 57220 .221 .357 .032 .438 .010 .075 .221 .226 # 2
8-32 57121 57221 .221 .357 .032 .500 .075 .120 .221 .226 # 2
10-24 57130 57230 .250 .406 .038 .531 .010 .080 .250 .254 1/4"
10-24 57132 57232 .250 .406 .038 .594 .080 .130 .250 .254 1/4"
10-32 57140 57240 .250 .406 .038 .531 .010 .080 .250 .254 1/4"
10-32 57142 57242 .250 .406 .038 .594 .080 .130 .250 .254 1/4"
1/4-20 57150 57250 .332 .475 .058 .625 .010 .080 .332 .338 Q
1/4-20 57152 57252 .332 .475 .058 .687 .080 .140 .332 .338 Q
1/4-20 57154 57254 .332 .475 .058 .750 .140 .200 .332 ..338 Q
5/16-18 57171 57271 .413 .665 .062 .750 .030 .125 .413 .423 Z
5/16-18 57174 57274 .413 .665 .062 .875 .125 .200 .413 .423 Z
3/8-16 57181 57281 .490 .781 .088 .844 .030 .115 .490 .500 12.5mm
3/8-16 57184 57284 .490 .781 .088 .938 .115 .200 .490 .500 12.5mm


Three easy steps for instalation: