R-N Series

R-N Series Threaded Insert

The R-N Series Rivet Nut features a heavy duty head profile and increased wall thickness in the collapse area. This makes the R-N Series ideal for leg leveling.

The R-N Series Rivet Nut can be installed using AVK's pneumatic hydraulic tools. The R-N Series Rivet Nut's heavier wall thickness and resulting upset load requires this type of tool be used for installation. The R-N Series can be installed either prior to or after finish.

R-NLogoB.jpg (15622 bytes)RNPartB.jpg (5852 bytes)
Thread
Size
Thread
Call
Out
Grip
Range
Grip
Call
Out
I.D.
Mark
Hole Size
+ .003
- .000
HD
±.015
HH
NOM.
L
±.015
D
+.000
-.004
IL
Ref.
4-40 UNC 440 .010-.060 60 BLANK 5/32 (.155) .270 .025 .345 .155 .230
4-40 UNC 440 .060-.085 85 1-RAD. 5/32 (.155) .270 .025 .370 .155 .230
4-40 UNC 440 .085-.110 110 2-RAD. 5/32 (.155) .270 .025 .400 .155 .230
6-32 UNC 632 .010-.075 75 1-RAD. #12 (.189) .325 .032 .438 .189 .300
6-32 UNC 632 .075-.120 120 3-RAD. #12 (.189) .325 .032 .500 .189 .315
6-32 UNC 632 .120-.160 160 5-RAD. #12 (.189) .325 .032 .500 .189 .270
8-32 UNC 832 .010-.075 75 1-RAD. #2 (.221) .357 .032 .438 .221 .300
8-32 UNC 832 .075-.120 120 3-RAD. #2 (.221) .357 .032 .500 .221 .315
8-32 UNC 832 .120-.160 160 5-RAD. #12 (.189) .357 .032 .500 .221 .270
10-32 UNF 1032 .010-.080 80 BLANK 1/4 (.250) .406 .038 .531 .250 .380
10-32 UNF 1032 .080-.130 130 1-RAD. 1/4 (.250) .406 .038 .594 .250 .390
10-32 UNF 1032 .130-.180 180 2-RAD. 1/4 (.250) .406 .038 .641 .250 .390
1/4-20 UNC 420 .020-.080 80 BLANK Q (.332) .475 .058 .625 .332 .450
1/4-20 UNC 420 .080-.140 140 1-RAD. Q (.332) .475 .058 .687 .332 .450
1/4-20 UNC 420 .140-.200 200 2-RAD. Q (.332) .475 .058 .750 .332 .450
5/16-18 UNC 518 .030-.125 125 BLANK Z (.413) .665 .062 .750 .413 .505
5/16-18 UNC 518 .125-.200 200 1-RAD. Z (.413) .665 .062 .875 .413 .555
5/16-18 UNC 518 .200-.275 275 2-RAD. Z (.413) .665 .062 .937 .413 .540
3/8-16 UNC 616 .030-.115 115 BLANK 12,5 mm (.490) .781 .088 .844 .490 .585
3/8-16 UNC 616 .115-.200 200 1-RAD. 12,5 mm (.490) .781 .088 .938 .490 .585
3/8-16 UNC 616 .200-.285 285 2-RAD. 12,5 mm (.490) .781 .088 1.031 .490 .605
1/2-13 UNC 813 .050-.150 150 BLANK 5/8 (.625) .906 .085 .906 .625 .605
1/2-13 UNC 813 .150-.250 250 1-RAD. 5/8 (.625) .906 .085 1.031 .625 .630
1/2-13 UNC 813 .250-.350 350 2-RAD. 5/8 (.625) .906 .085 1.141 .625 .640


Thread
Size
Thread
Call
Out
Grip
Range
Grip
Call
Out
I.D.
Mark
Hole Size
+0,08
-0,00
HD
±0,38
HH
NOM.
L
±0,38
D
+0,00
-0,10
IL
Ref.
M3x0,5 ISO 350 0,25-1,00 1.0 BLANK 3,94 6,68 0,63 8,00 3,93 5,61
M3x0,5 ISO 350 1,00-1,75 1.75 1-RAD. 3,94 6,68 0,63 8,75 3,93 5,61
M3x0,5 ISO 350 1,75-2,50 2.5 2-RAD. 3,94 6,68 0,63 9,50 3,93 5,61
M4x0,7 ISO 470 0,25-2,00 2.0 BLANK 5,60 9,01 0,81 11,00 5,61 7,08
M4x0,7 ISO 470 2,00-3,00 3.0 1-RAD. 5,60 9,01 0,81 12,00 5,61 7,08
M4x0,7 ISO 470 3,00-4,00 4.0 2-RAD. 5,60 9,01 0,81 13,00 5,61 7,08
M5x0,8 ISO 580 0,25-2,00 2.0 BLANK 7,20 11,17 1,22 14,50 7,13 10,09
M5x0,8 ISO 580 2,00-3,50 3.5 1-RAD. 7,20 11,17 1,22 16,00 7,13 10,09
M5x0,8 ISO 580 2,00-3,50 3.5 1-RAD. 7,20 11,17 1,22 16,00 7,13 10,09
M5x0,8 ISO 580 3,50-5,00 5.0 2-RAD. 7,20 11,17 1,22 17,50 7,13 10,09
M6x1,0 ISO 610 0,75-2,00 2.0 BLANK 8,50 13,43 1,47 15,50 8,43 10,58
M6x1,0 ISO 610 2,00-3,50 3.5 1-RAD. 8,50 13,43 1,47 17,00 8,43 10,58
M6x1,0 ISO 610 3,50-5,00 5.0 2-RAD. 8,50 13,43 1,47 18,50 8,43 10,58
M8x1,25 ISO 8125 1,00-3,00 3.0 BLANK 10,50 16,65 1,57 18,00 10,48 11,83
M8x1,25 ISO 8125 3,00-5,00 5.0 1-RAD. 10,50 16,65 1,57 20,00 10,48 11,83
M8x1,25 ISO 8125 5,00-7,00 7.0 2-RAD. 10,50 16,65 1,57 22,00 10,48 11,83
M10x1,5 ISO 1015 1,00-3,00 3.0 BLANK 12,50 19,50 2,23 20,00 12,44 13,20
M10x1,5 ISO 1015 1,00-3,00 3.0 BLANK 12,50 19,50 2,23 20,00 12,44 13,20
M10x1,5 ISO 1015 3,00-5,50 5.5 1-RAD. 12,50 19,50 2,23 22,50 12,44 13,20
M10x1,5 ISO 1015 5,50-8,00 8.0 2-RAD. 12,50 19,50 2,23 25,00 12,44 13,20
M12x1,75 ISO 12175 1,00-3,00 3.0 BLANK 15,50 22,79 2,23 24,00 15,46 16,45
M12x1,75 ISO 12175 3,00-5,50 5.5 1-RAD. 15,50 22,79 2,23 26,50 15,46 16,45
M12x1,75 ISO 12175 5,50-8,00 8.0 2-RAD. 15,50 22,79 2,23 29,00 15,46 16,45

AVKBulletLogo.jpg (5683 bytes) INCREASED PUSH-OUT LOADS are achievable in leg leveling applications when using the R-N Series due to its heavy duty head profile and thick wall construction.

AVKBulletLogo.jpg (5683 bytes) SUPERIOR THREAD STRENGTH is provided due to our internal rolled thread manufacturing process.

AVKBulletLogo.jpg (5683 bytes) SUPERIOR CORROSION RESISTANCE is provided by our standard cadmium finish (72 hrs. salt spray).


AVKBulletLogo.jpg (5683 bytes) UNIFORM INSTALLATION is guaranteed because of the dimensional tolerances and  concentricity tolerances built into our product made possible by our cold forming technology.

AVKBulletLogo.jpg (5683 bytes) AVAILABLE in steel and aluminum. For additional materials, contact AVK for availability.

 

Various R-N Series Design Types

RNcPart.jpg (4242 bytes)

CLOSED END

Thread area is enclosed eliminating leakage past the threads from either side of the
application.
Contact AVK for availability.

KEYED HEAD

An underside of the head “key” projection when placed into a
matching “keyed” hole design
provides additional torque resistance.
Contact AVK for availability
.

100º COUNTERSUNK HEAD

A 100° countersunk head profile when installed into a
matching countersunk hole
provides a flush installation.
Contact AVK for availability.