A-H Series

A-H Series Threaded Insert

The A-H Series Insert features a radius corner hex body. When installed into a corresponding hex hole, the radius corners of the A-H Series Insert expand and fill the hole corners providing exceptional resistance to spinning in the panel. The A-H Series is designed to be used with Grade 5 or Metric Class 8.8/9.8 mating screws.

The A-H Series Insert can be installed using AVK's ARO brand pneumatic tools or AVK's SPP™ pneumatic/hydraulic tools. These tools can be located at any position on your assembly line. The A-H Series Insert can be installed either before or after finish.






AVKBulletLogo.jpg (5683 bytes) EXCEPTIONAL resistance to spinning in the panel is achieved as the A-H Series’ hex body expands FILLING THE HOLE.

AVKBulletLogo.jpg (5683 bytes) AVOID STRESS FRACTURES of your material and prolong punch and die life by specifying a radius corner in your hex hole. This is possible when using the A-H Series radius hex body insert.

AVKBulletLogo.jpg (5683 bytes) QUALITY INSTALLATIONS even in variable thickness materials are assured by AVK’s spin/spin ARO pneumatic tools and our SPP™ pneumatic/hydraulic tools..

AVKBulletLogo.jpg (5683 bytes) SUPERIOR THREAD STRENGTH is provided due to our internal rolled thread manufacturing process.

  AVKBulletLogo.jpg (5683 bytes) THREADS GAUGE before and after installation due to the increased cross-sectional thickness of  the thread area. Thread dilation is prevented.

AVKBulletLogo.jpg (5683 bytes) INVENTORY REDUCTION is possible because of the A-H Series’ wide grip range capacity. It is 2.5 times greater than conventional rivet nuts.

AVKBulletLogo.jpg (5683 bytes) SUPERIOR CORROSION RESISTANCE is provided by our standard zinc/yellow dichromate finish (96 hrs. salt spray to white corrosion). For exceptional corrosion protection we offer a tin/zinc alloy finish

AVKBulletLogo.jpg (5683 bytes) AVAILABLE IN STEEL.

 

Various A-H Series Design Types
CLOSED END

Thread area is enclosed eliminating leakage past the threads from either side of the application.

 

 SEALED HEAD

A PVC foam seal is bonded to the underside of the head and when installed provides a weathertight seal. (Also available in the closed end version.)