Home    |    Products    |   Request Information     |   News   |    Corporate

  ALL TYPES
  AK
  AL
   >  AT
  RN
  AR
  AH
  AW
 AT
A-T Series Threaded Insert
     
The A-T Series Insert is unique in that it can be installed into most any material above .030/,76 mm in thickness. As the A-T Series is installed, the threaded portion is completely swaged 360° into the sleeve portion and the hole. This permits the A-T Series to be used with Grade 8/Metric 12.9 mating screws.

The A-T Series Insert is installed using lightweight, handheld pneumatic ARO tools that can be located at any position in your product’s assembly sequence. The A-T Series Insert can be installed either prior to or after finish.

A-TLogoB.jpg (14282 bytes)ATPartB.jpg (4908 bytes)

AVKBulletLogo.jpg (5683 bytes) REDUCED OVERALL LENGTH of the installed A-T Series Insert allows it to be used in limited clearance applications.

AVKBulletLogo.jpg (5683 bytes) QUALITY INSTALLATIONS even in variable   thickness materials are assured by our spin/spin torque stall tools.

AVKBulletLogo.jpg (5683 bytes) INVENTORY REDUCTION is possible because one A-T Series Insert will work in any thickness material above .030/,76 mm.


AVKBulletLogo.jpg (5683 bytes) INSTALLS INTO MOST ANY MATERIAL with a thickness over .030/,76 mm.

AVKBulletLogo.jpg (5683 bytes) CAN BE USED WITH GRADE 8/METRIC CLASS 12.9 SCREWS due to the A-T Series high shear load capability.

AVKBulletLogo.jpg (5683 bytes) AVAILABLE in Steel from stock. Aluminum, Brass and Series 304 Stainless Steel are available by special order. Contact AVK for details.

 

Various A-T Series Design Types

ATPartcB.jpg (5192 bytes)

 CLOSED END

Thread area is enclosed eliminating leakage past the threads from either
side of the application.